LWL Duplex Jumper LC/LC, 50/125µ, LSZH, OM5, multimode, 0.5m, lime green

Article information

 

FO patch cables are defined components of an internationally standardized
structured cabling according to ISO/IEC11801. Historically, many different
connectors have been used in structured cabling. Different connectors,
whereby the following are still relevant: LC, SC, E2000®, MPO/MTP.

 

A fiber optic patch cable is the shortest connection between a passive
cabling port and an active network port. and an active network port or a
point-to-point connection between two active network ports. Quality classes
allow a qualitative differentiation of the FO patch cables depending on the
network service

 

Equivalent terms for patch cables:

Patch cable, adapter cable, connecting cable, hybrid cable, jumper,
connecting cord.

 

Characteristics of fiber optic patch cables

Strain relief reinforced with aramid yarn

Halogen-free and flame retardant jacket according to
IEC-60754-2, IEC-60332-1 and IEC-61034

Fiber optic connectors meet the minimum quality class
Grade B/2 according to IEC-61753-1 for Singlemode

and Grade A/1 for Multimode according to IEC 61753-122-2 (UPC cut)

100% tested and with individual measurement protocol

 

 

Product features

 

Fiber type : Multimode 50/125

Category : OM5

Bend optimized fiber : OM5 according to IEC60793-2-10 type A1a.4

Number of fibers : 2

bend protection sleeve : plugged on

Connector type port 1: LC duplex

Connector type port 1 color: beige

Connector type connector 2: LC-Duplex

Connector port 2 color: beige

Maximum tensile force: 160 N

Minimum bending radius (Static): 10xOD

Minimum bending radius (Dynamic): 20xOD

Cable type: I-V(ZN) H

Cable construction: Duplex

Cable Ø: 2,0 mm

Jacket color: lime green

Jacket material: LSZH

Flame retardant: According to EN 50265-2-1

Halogen free: According to IEC60754-1

Low smoke: According to IEC61034-1

Working temperature: -20 - 70 °C

Storage temperature: -20 - 85 °C

Insertion loss 850nm: <0.2 dB

Quality class multimode: A/1 according to IEC-61753-222-2

Connector Conforms to standard: IEC 61754-20

Cable Conforms to standard: IEC 60793-2

Length tolerance +- 5%

 

Available in the following lengths:

0.5m, 1.0m, 2.0m, 3.0m, 5.0m, 7.5m, 10.0m, 15.0m, 20.0m,

25.0m, 30.0m, 35.0m, 45.0m, 50.0m