RJ45 patch cord with CAT7 raw cable 10Gbit LSZH yellow 10m

RJ45 PATCH CABLE with CAT7 ROUGH CABLE, S/FTP, PIMF Network Cable LAN DSL Cat.7 raw cable: more data through the wire The Cat.7 network cable is practically an upgrade to the Cat.6A patch cable: The Cat.6A network cable is equipped with a Cat.7 raw cable. This makes it suitable for an operating frequency of up to 600 MHz and a transmission speed of up to 10 Gbit/s. The Cat.6A raw cable, on the other hand, has an operating frequency of 500 MHz. Due to the increased frequency, the Cat.7 patch cable with CAT.6a connector can handle significantly more data traffic. cope. The halogen-free outer jacket of the Cat.7 cable provides additional safety. The patch cables are produced with a Cat.7 raw cable to ensure the highest possible performance. They are perfect for use in high-speed networks and for connecting routers, switches, lighting systems, digital displays computers or any of the many new IoT devices. The Cat.7 network cable shows its optimal strength in the Interaction with the data outlet, and the patch panel and keystone. These products can easily cope with the high standards of the high-speed environment that the use of Cat.7 network cables entails. Cat.7 cables are used, among other things, in professional IT networks and in media technology, where large amounts of data have to be transmitted reliably. Cat.7 network cable with gold contacts in CAT.6A RJ45 connector Each Cat.7 cable pair within the Cat.7 patch cables with CAT.6A connectors is individually shielded in metal foil (PIMF). This makes these cables particularly suitable for interference-free data transmission. Due to its kink and jack protection, the high-quality, shielded Cat.6A RJ45 connector with gold-plated contacts can withstand a high number of mating cycles without damage. Your end devices will remain connected to the Internet even if they are moved unintentionally: These Cat.7 cables with CAT.6A connectors can only be disconnected from the device by pressing the latching lug on the RJ45 connector. The Cat.7 network cables are backward compatible, so they can also be used in Cat.5 or Cat.6 networks and speeds up to 10 Gbit can be achieved. General Data: Contacts: 3 µ" Gold plated Suitable for protection class: (IP) IP20 Cable type: S/FTP Pin assignment: 1:1 Latching lever protection: Yes Design: Shielded Jacket material: LSZH Assignment: according to TIA/EIA 568B Application: Data center Length imprint: Yes Bend relief: molded Category: 6A (TIA) Connector type: RJ45 standard Cable construction: Raw cable: Cat.7 Connector type: Connector 2 RJ45 8(8) AWG cross section: 27/7 Connector type: Port 1 RJ45 8(8) Conductor material: Copper Cable construction: 4x2 Cable sheath: Cable outer diameter 6.0 mm